11/01/2016 15:33
Anywhere super long line targeting is in need, it is not an easy work for users to get a quite efficient solution until the appearance of pro red line laser alignment. It gets super brighter and more visible red laser beam from 635nm red laser diode, which has just made this line laser module much more efficient than formal 650nm red laser device, thus getting at least 5 times brighter and purer red alignment laser line source generation on all targeting surfaces.
The generating red laser beam from pro red line laser alignment is much better than formal 650nm red laser module. The direct laser beam cannot only assure its much longer time continuous line alignment with high stability, for the most important of all, when 635nm red laser module gets the most special TEM00 laser beam mode, it has just made the desired red laser line available with even better laser linear quality for long term continuous red line targeting work.
The desired red reference line from pro red line laser alignment is just an accessory part of those of industrial laser use fields. For instance, when this 635nm red laser module is being used for stone raw material processing, the highly straight red alignment laser line will instruct factory workers to make clear line cutting on stones. During the process of stone cutting, red laser line will never be covered by cutting knife or disappear. The selection of laser line generator is much more superior than any other type of manual line drawing or printing work, which is just efficient enough to avoid mistake caused by manual operation. The laser line alignment leaves no track on hard stones, while still ensures the most efficient raw materials processing with high speed and high accuracy.
In practical line measuring work, pro red line laser alignment is always required to generate different line length on real raw material surfaces. It is getting the selectable optic lens of glass cylindrical lens or separate crystal lens. When red line laser module gets wide range optic lens degree from 10 to 110 degree, it is just producing different line length and line thickness. Under forming lighting line measuring work, this laser line generator is getting the maximum line length of 6 meters in distance. Users just need of pay special attention to surrounding working environment so as to assure reliable and stable alignment laser line targeting result.
09/16/2016 17:36
There are always a lot working places where real dot alignment is processed at much longer distance, but not just limited within your hand reaching distance. It is just not an easy work for users to use simple dot sticker, but have to select advanced pro red dot laser alignment so as to get bright and visible enough red reference dot in distance. When red laser module gets high brightness red laser beam from 635nm red laser diode, besides its quite low laser beam divergence, red laser dot is also workable at quite long distance and high lighting working occasion.
Once the real dot alignment is processed out of your hand reaching distance, it is not an easy work to still keep in mind of simple sticker or laser pointer. Temporary dot measuring work is not workable for industrial inspection work, which cannot be operated continuously, but also cannot assure its precise enough dot alignment result as expected. In order to avoid mistake caused by manual operation, red laser module is just substituting those of manual dot measuring tool, but just getting high brightness red alignment laser dot positioning result as expected.
When pro red dot laser alignment is applied in advanced industrial inspection work, it gets at least 5 times brighter red laser beam than formal 650nm red laser module. High purity and high brightness red laser beam is even more workable for higher lighting and much longer distance dot alignment operation. The special TEM00 laser beam transverse mode has just made this red laser diode module much better than any other type of visible laser devices. Even though the real dot laser alignment is processed at longer distance of about 25 meters, red laser dot still keeps quite compact diameter, making sure of precise enough red alignment laser dot positioning as expected.
In order to keep precise enough red dot positioning at much longer distance, pro red dot laser alignment should be selected with high output power range of 50mW to 100mW. The quite compact diameter red laser dot is always efficient enough to assure precise enough dot alignment positioning as expected. At the same time, the real dot aligning work should also pay special attention to powerful red laser beam radiation, and remember to wear laser safety glasses so as to get secured dot positioning result as expected. Whenever 635nm red laser module is getting proper installation and adjustment, it is just the best choice for users to get the most wonderful dot positioning result as expected.
There are always a lot working places where real dot alignment is processed at much longer distance, but not just limited within your hand reaching distance. It is just not an easy work for users to use simple dot sticker, but have to select advanced pro red dot laser alignment so as to get bright and visible enough red reference dot in distance. When red laser module gets high brightness red laser beam from 635nm red laser diode, besides its quite low laser beam divergence, red laser dot is also workable at quite long distance and high lighting working occasion.
Once the real dot alignment is processed out of your hand reaching distance, it is not an easy work to still keep in mind of simple sticker or laser pointer. Temporary dot measuring work is not workable for industrial inspection work, which cannot be operated continuously, but also cannot assure its precise enough dot alignment result as expected. In order to avoid mistake caused by manual operation, red laser module is just substituting those of manual dot measuring tool, but just getting high brightness red alignment laser dot positioning result as expected.
When pro red dot laser alignment is applied in advanced industrial inspection work, it gets at least 5 times brighter red laser beam than formal 650nm red laser module. High purity and high brightness red laser beam is even more workable for higher lighting and much longer distance dot alignment operation. The special TEM00 laser beam transverse mode has just made this red laser diode module much better than any other type of visible laser devices. Even though the real dot laser alignment is processed at longer distance of about 25 meters, red laser dot still keeps quite compact diameter, making sure of precise enough red alignment laser dot positioning as expected.
In order to keep precise enough red dot positioning at much longer distance, pro red dot laser alignment should be selected with high output power range of 50mW to 100mW. The quite compact diameter red laser dot is always efficient enough to assure precise enough dot alignment positioning as expected. At the same time, the real dot aligning work should also pay special attention to powerful red laser beam radiation, and remember to wear laser safety goggles so as to get secured dot positioning result as expected. Whenever 635nm red laser module is getting proper installation and adjustment, it is just the best choice for users to get the most wonderful dot positioning result as expected.
07/14/2016 16:45
How do you like to do to get super stable and reliable cross line alignment in distance? It is just not an easy work after the selection of glass lens made green cross line laser module. The manufacturing work of this industrial stabilized cross laser alignment tool makes sure of advanced design of intelligent feedback system controlled electric driving circuit board, no matter how long it has lasted for continuous cross line positioning, green cross line laser module keeps the most stable cross line positioning on various raw materials surfaces efficiently.
The manufacturing work of green cross line laser module pays high attention to wide operating temperature stabilization. It employs advanced design of 532nm green DPSS laser tech, whatever kind of targeting surface, green laser beam targeting keeps extremely high laser beam transmittance ability. In quite long work distance, cross line laser module keeps stable green cross line targeting. Owing to its strict tests, including super rapid electric adding test, alternative high and low temperature changing test, and up 24 hours aging preventing test, no matter how long it is lasted for constant green cross line alignment work, this cross laser alignment tool is just a great choice, no appearance of laser light dim or blur in use.
The production work of green cross line laser module pays special attention to beam stability. It adopts durable structure design from aircraft used aluminum alloy housing. This metal housing is getting superior thermal conductivity, making green laser alignment workable within wide range environmental temperature. Under quite lower temperature lower than room temperature, users just need to make very simple preheating of green laser module tube. After about 30 seconds preheating, cross laser alignment tool recovers its good performance, keeping bright and visible enough green cross line laser source positioning brightly.
Owing to its high output power range of 5mW to 100mW, green cross line laser module is workable for quite long work distances. Even though cross line alignment is processed at quite longer work distance, it is still required with extremely high line straightness and fineness. This cross laser alignment tool just employs qualified glass cylindrical lens, which just made it workable with extremely high beam transmittance and high linear quality. With the work distance extending much longer, green laser module is just efficient enough to keep precise cross line alignment perfectly. Whenever cross line aligning is workable, it is very important for users to wear laser safety glasses so as to get secured cross line alignment precisely.
How do you like to do to get super stable and reliable cross line alignment in distance? It is just not an easy work after the selection of glass lens made green cross line laser module. The manufacturing work of this industrial stabilized cross laser alignment tool makes sure of advanced design of intelligent feedback system controlled electric driving circuit board, no matter how long it has lasted for continuous cross line positioning, green cross line laser module keeps the most stable cross line positioning on various raw materials surfaces efficiently.
The manufacturing work of green cross line laser module pays high attention to wide operating temperature stabilization. It employs advanced design of 532nm green DPSS laser tech, whatever kind of targeting surface, green laser beam targeting keeps extremely high laser beam transmittance ability. In quite long work distance, cross line laser module keeps stable green cross line targeting. Owing to its strict tests, including super rapid electric adding test, alternative high and low temperature changing test, and up 24 hours aging preventing test, no matter how long it is lasted for constant green cross line alignment work, this cross laser alignment tool is just a great choice, no appearance of laser light dim or blur in use.
The production work of green cross line laser module pays special attention to beam stability. It adopts durable structure design from aircraft used aluminum alloy housing. This metal housing is getting superior thermal conductivity, making green laser alignment workable within wide range environmental temperature. Under quite lower temperature lower than room temperature, users just need to make very simple preheating of green laser module tube. After about 30 seconds preheating, cross laser alignment tool recovers its good performance, keeping bright and visible enough green cross line laser source positioning brightly.
Owing to its high output power range of 5mW to 100mW, green cross line laser module is workable for quite long work distances. Even though cross line alignment is processed at quite longer work distance, it is still required with extremely high line straightness and fineness. This cross laser alignment tool just employs qualified glass cylindrical lens, which just made it workable with extremely high beam transmittance and high linear quality. With the work distance extending much longer, green laser module is just efficient enough to keep precise cross line alignment perfectly. Whenever cross line aligning is workable, it is very important for users to wear laser safety glasses so as to get secured cross line alignment precisely.
05/25/2016 20:56
Not the same as any manual line measuring tools, laser line alignment is always making sure of super wonderful line positioning result in distance. As a result, in order to make sure of super wonderful line alignment on various working surfaces, more and more users are beginning to choose laser line generator, instead of extra time spending on prior line drawing or line printing work, it is just ensuring high work efficiency. According to its configuration of qualified separate crystal lens, alignment laser line just keeps extremely high beam uniformity, providing users the best line positioning solution for all high tech work fields efficiently.
It is not an easy work for users to make line alignment, however, the selection of laser line generator is always very easy and convenient. Users just need to make very simple connection with external DC input power supply, thus getting highly visible alignment laser line positioning in distance. Within the selecting operating voltage of 3V to 4.2V DC input power supply, it just supports visible laser line generators with wide output power range of 5mW to 100mW.
According to exact work distance, users need to choose correct output power. At the same time, within low power range of 5mW to 20mW, laser line generator should be equipped with 3V DC power supply. Once users are choosing higher output power laser line module up 30mW to 100mW, it is just equipped wither higher operating voltage of 4.2V. In various industrial line alignment work, users should choose correct operating voltage power supply. When operating voltage is higher than expected, line laser module might be easily burning out. However, lower operating voltage DC power supply is not supporting bright and visible enough alignment laser line positioning in distance.
The operating of laser line generator is not the same as a simple presentation tool used for entertainment, but should be correctly operated by skilled person. Users should always try to install this compact structure line laser alignment on any vertical or horizontal working surface of industrial machine or device. Although there are a lot of working places where human hands cannot reach, however, noncontact laser line allows very easy adjustment until reaching all targeting surfaces efficiently.
In accurate line alignment of laser cutting machine, textile garment processing, wooden board processing, or industrial inspection works, users should try to choose correct laser lens degree separate crystal lens. Within wide laser lens degree of 10 to 93 degree, this industrial alignment laser generates different line length in distance. At the same time, once working surface is quite dark, part of laser beam might be absorbed, while users should choose higher output powered laser line generator so as to get clearly visible line in use.
04/18/2016 19:30
Whenever cross line targeting is under night vision illumination work fields, it is a always a super wonderful experience for users to have a try of 980nm infrared cross laser alignment. Not the same as any other manual cross line drawing tools, such as a square meter or triangular board, under special configuration of night vision illumination devices, such as CCD camera, black and white camera and night vision illumination devices, this 980nm infrared cross line laser is always getting extremely high straightness and fineness cross line laser source on all working surfaces.
Not the same as those of formal lighting or inner room working occasion, under night vision illumination work fields, only if users are getting the choice of 980nm infrared cross laser alignment, it can fulfill the need perfectly. Owing to its longer wavelength and special configuration of night vision illumination devices, this 980nm infrared laser module can generate superior straight and fine infrared cross line laser source, fulfilling high accuracy cross laser alignment in all special work fields, such as surveillance, military targeting, laser medical treatment devices, night hunting and telescope observation etc.
Under special infrared illumination work fields, 980nm infrared cross laser alignment always gets extremely high laser beam transmittance ability. Within wide output power range of 5mW to 500mW, this infrared laser module is workable for quite long work distance within 100 meters to 1000 meters. It is never a kidding work to make cross line targeting with this cross line laser module. Human eyes cannot capture any powerful IR laser radiation, thus there are serious and potential dangers to laser users while any powered 980nm infrared laser module is operated.
Owing to high output power of range as high as 500mW, 980nm infrared cross laser alignment is workable for all kinds of cross line targeting work continuously. As a result, it just uses high configuration of APC, ACC electric driving circuit board. In constant cross line alignment work, 980nm infrared laser module gets constant output power supplying for its internal part of 980nm infrared laser diode, no chance of laser diode and electric driving circuit board burning out or damage.
Under proper laser safety measuring rules, this industrial alignment laser always gets extremely long serving lifetime, and high stability infrared cross line positioning under night illumination work fields efficiently. Although you are only operating a low power 5mW 980nm infrared crosshair laser module, while it is still very important for users to pay special attention to powerful IR laser radiation. According to proper choice of 980nm wavelength preventing laser safety goggles, users always gets high security infrared cross line targeting efficiently.
03/26/2016 09:08
When laser diode tech applied 650nm red line laser alignment is applied in various machinery processing works, it would have to make high stability red laser line targeting so as to equip with continuous operation of various machine or devices. For instance, in laser line alignment work, this red laser module is equipped with laser cutting machine, laser medical treatment devices, screen printing machine or heat transfer machine etc. Whenever laser line alignment is processed on various working surfaces, red alignment laser line is clear visible and bright.
Not the same as formal red laser pointer, the design of 650nm red line laser alignment is fully obeying its industrial stabilization. Instead of simple alkaline battery power source, this laser line alignment tool uses external DC input power supply. In constant laser line alignment work, users have no need to make battery change, but supporting long term continuous alignment laser line positioning on various targeting surfaces efficiently. The operation of this laser line generator always gets superior performance of high accuracy, low power consumption and low time consumption.
Besides high quality internal part adoption, before flowing into laser market, 650nm red line laser alignment always passes through extremely strict test. According to more than 24 hours aging preventing test, in the following process of continuous alignment laser, the internal part of 650nm red laser diode keeps high beam stability, no appearance of laser diode burning out or damage. Under proper laser operation rules, this red laser alignment always gets extremely long serving lifetime of more than 8000 hours.
When red line laser alignment is worked on various targeting surface, laser line brightness shows different result. For instance, once some working surface is quite dark or black, part of red laser beam might be affected, while users would prefer to choose higher output power than actual need. However, users only need to choose actual output power made red line laser alignment so as to get satisfied line positioning on light color working surface. When users are getting correct selection of output power, this laser line generator can easily get bright and visible enough red alignment laser line targeting perfectly.
Sometimes users are choosing high power red line laser alignment for quite long work distance or higher lighting working occasions. However, its operation is still very easy and convenient. It is very important for users to pay more attention to powerful laser radiation, thus making sure of high security laser line generation on all working surfaces. According to easy installation of industrial alignment laser line on required machine or device, users can easily get high precision line positioning precisely and accurately.
02/16/2016 20:31
In quite special work fields, such as military targeting or laser medical treatment works, a lot of users would prefer to use high brightness blue laser diode module so as to get highly bright and visible blue laser dot targeting and instruction on all targeting surfaces efficiently. It belongs to an industrial developed laser dot alignment tool, on basis of its full consideration of thermal emitting system, blue reference dot targeting always keeps extremely high laser beam stability and reliability. This attractive laser beam targeting laser diode module is also bringing users super wonderful result for industrial precise machinery processing works.
The operating output power of blue laser diode module is ranging from 50mW to 100mW, thus it is always making great work for quite long work distance dot measuring works. At the same time, from the beginning design until practical dot measuring work, laser tech engineer always pays full consideration of thermal conductivity of this laser dot alignment tool.
Inside the tube of industrial laser dot alignment tool, it gets enough space reserved as its metal heat sink cooling system. As the core part of 445nm blue laser diode, it uses copper raw material as its core part. Both parts makes sure of the most efficient thermal conductivity of the laser diode module, providing users highly stable and reliable blue reference dot targeting on all desired working surfaces efficiently.
Among all selectable wavelength of visible laser spectrum, when 445nm wavelength laser diode is manufactured into advanced blue laser diode module, it always gets quite high output power range from 50mW to 100mW. In order to make it more workable for various industrial dot aligning works, its design should pay high attention to its laser beam stability. It uses larger size laser tube diameter of 26mm. Besides there is enough space reserved as its metal heat sink cooling system, however, for the most important of all, this advanced blue dot projecting laser alignment tool pays gets more concentration on its laser beam stability test.
According to a series of strict tests of super rapid electric adding, alternative high and low temperature test, and more than 24 hours electric adding test, in the following process of long term continuous blue laser dot targeting work, the performance of blue laser diode module has no affect by surrounding working environments. Within quite wide operation temperature range, users need to make proper adjustment of laser beam focus, thus always getting high precision blue alignment laser dot positioning perfectly.
02/16/2016 20:28
In quite special work fields, such as military targeting or laser medical treatment works, a lot of users would prefer to use high brightness blue laser diode module so as to get highly bright and visible blue laser dot targeting and instruction on all targeting surfaces efficiently. It belongs to an industrial developed laser dot alignment tool, on basis of its full consideration of thermal emitting system, blue reference dot targeting always keeps extremely high laser beam stability and reliability. This attractive laser beam targeting laser diode module is also bringing users super wonderful result for industrial precise machinery processing works.
The operating output power of blue laser diode module is ranging from 50mW to 100mW, thus it is always making great work for quite long work distance dot measuring works. At the same time, from the beginning design until practical dot measuring work, laser tech engineer always pays full consideration of thermal conductivity of this laser dot alignment tool.
Inside the tube of industrial dot laser alignment tool, it gets enough space reserved as its metal heat sink cooling system. As the core part of 445nm blue laser diode, it uses copper raw material as its core part. Both parts makes sure of the most efficient thermal conductivity of the laser diode module, providing users highly stable and reliable blue reference dot targeting on all desired working surfaces efficiently.
Among all selectable wavelength of visible laser spectrum, when 445nm wavelength laser diode is manufactured into advanced blue laser diode module, it always gets quite high output power range from 50mW to 100mW. In order to make it more workable for various industrial dot aligning works, its design should pay high attention to its laser beam stability. It uses larger size laser tube diameter of 26mm. Besides there is enough space reserved as its metal heat sink cooling system, however, for the most important of all, this advanced blue dot projecting laser alignment tool pays gets more concentration on its laser beam stability test.
According to a series of strict tests of super rapid electric adding, alternative high and low temperature test, and more than 24 hours electric adding test, in the following process of long term continuous blue alignment laser dot targeting work, the performance of blue laser diode module has no affect by surrounding working environments. Within quite wide operation temperature range, users need to make proper adjustment of laser beam focus, thus always getting high precision blue alignment laser dot positioning perfectly.
10/14/2015 14:47
What is your decision to get a high quality green reference line positioning for all kind of industrial work fields? It might be a great challenge for users before proper line measuring tool is being selected. The adoption of green laser module always makes the best use of the most visible 532nm green laser beam. As a result, even though users are required to make high precision line generation under sunlight, green line laser alignment is still workable for users.
High brightness green line laser alignment is very special, in order to make sure of its best quality laser line generation result, it just selects the highest configuration of separate crystal as its line emitting source. This higher configured separate crystal always gets even better line projection than glass cylindrical lens and plastic coated lens. As a result, no matter close distance or long distance, laser line always keeps its high straightness. From the middle part of laser line towards two ends, green reference line always keeps the same brightness, and uniform green line emission at all working surfaces efficiently.
For the most important of all, besides formal lighting working environments, high brightness green laser module is also workable under sunlight. Once the selecting output power is higher than 50mW, it is just efficient enough to generate bright and visible green reference line on all desired working surfaces. In formal lighting working fields, the maximum green line can maximum reach as long as 6 meters.
The separate crystal equipped green line laser alignment always ensures high uniformity and high straightness green reference line generation. Even though this green laser module can get quite satisfied line positioning result on desired working surfaces, however, it is still very important for users to get correct selection of laser lens degree and output power.
Before users are getting quite satisfied line positioning, users should always make super clear calculation of desired line length, line thickness and work distance from laser beam aperture onto work surface.
Besides correction selection of laser lens degree and output power, according to very simple connection with DC input power supply, green laser module just begins to work after proper operating voltage is supplied. Once the selecting output power of green line laser alignment is higher than 30mW, it always selects larger size laser tube with higher operating voltage of 4.2V. Only after users are making proper adjustment of alignment laser line targeting direction, users can easily get obtained line length and line thickness perfectly.
08/26/2015 17:45
What is your choice to make super accurate dot generation on all industrial dot measuring surface? The adoption of 50mW 650nm red laser diode module always brings users totally different experience in long term continuous dot projection, thus it has just made great work for accurate dot generation in laser marking machine, laser engraving machine, and current textile button positioning work. Whenever it is being installed on desired machine or device, this advanced red dot projecting laser alignment tool is just able to get the satisfied dot alignment result after easy mounting and installation.
When this high powered 50mW red laser diode module is being used in those of industrial dot alignment work, it is just keeping high concentricity red dot generation on desired work surface. This is just a high powered alignment laser dot measuring tool, thus it is just able to make great dot projection result at quite long working distance. Even though this 650nm red laser is not as visible as 532nm green laser, however, this direct emission 650nm red laser diode manufactured laser diode module is always able to generate highly stable and reliable red reference dot on all desired working surfaces efficiently.
When I am trying to make dot positioning on cloths button work, it has just brought me completely different experience in practical use. This 50mW red laser module is just a very special dot measuring tool. When it is pointed on cloths, it just instructs users to make accurate instruction, thus assuring of the most satisfied dot positioning on all cloths efficiently. After very easy mounting of this advanced 650nm red laser diode module, it just makes the most accurate dot positioning, thus makes sure of super rapid and accurate button positioning. Whenever it is being used for garment making production line, it has just made great work, and finally gain accurate button positioning on basis of its highly visible red reference dot.
In order to make sure of its high stable and high reliability red laser dot projection, 50mW 650nm red laser diode module makes full consideration of its thermal emitting performance. Inside the tube of this red dot laser, it always gets enough space as its metal heat sink cooling system, together with its metal housing material, this advanced dot measuring tool has just fulfilled all kinds of industrial alignment laser dot positioning. At the same time, it is very important to pay high attention to laser safety, and wear 650nm wavelength preventing laser safety goggles until getting the best dot alignment efficiently.